Download the Garage Beacon app from the app store or google play
Tap the scan button under the setup tab
Plug your Garage Beacon unit into a wall outlet and tap the pairing button
Verify that the Garage Beacon's ID is displayed on the Garage Beacon App
Tap the Pin Management tab and enter your Master Pin then tap "update"
The list of Personal Pins will appear all with the test PIN "11111"
Tap edit and set a new Personal Pin
Tap the setup Tab and enter the new Personal Pin
Tap the Manual tab and tap the Garage Beacon logo
Watch the amber LED control indicator flash as you tap the Garage Beacon logo
Unplug the unit and remove the backing on the double-sided tape and mount the unit under the garage door opener with the wires going towards the back (away from the opening of the garage door)
Plus the unit into the electrical outlet adjacent to your garage door opener's electrical outlet
Identify where your wall control switch connects to your garage door opener
Don't worry about trying to identify which connection is positive and which is ground
Twist each of the ends of the garage beacon control wires to the wall control unit's wires and tap the garage beacon logo on your phone to trigger an opening command. If the amber LED illuminates but the garage door does not respond, you have the connections flip-flopped. Untwist the wires and tap the garage beacon logo once more. Your garage door now opens and closes from your phone.
Congratulations! You are now finished! Now go show off your new gadget to your friends!